Stainless Steel Triangular Drive Flat Head Tamper Proof Tapping Screws

Model NO.: DRLTPSFTRB-1
Thread Type: "B"
Point Type: Blunt
Application: Thin Metal, Plastics etc.
Length: 5/32" ~ 2", 4.0 ~ 50mm
OEM/ODM: Available
Trademark: Drolee
Transport Package: Bulk
Specification: #4 ~ #14, 2.9 ~ 6.3mm
Origin: China
HS Code: 7318159090
Model NO.: DRLTPSFTRB-1
Thread Type: "B"
Point Type: Blunt
Application: Thin Metal, Plastics etc.
Length: 5/32" ~ 2", 4.0 ~ 50mm
OEM/ODM: Available
Trademark: Drolee
Transport Package: Bulk
Specification: #4 ~ #14, 2.9 ~ 6.3mm
Origin: China
HS Code: 7318159090
18-8/304/316 Stainless Steel Triangular Drive Flat Head Thread-rolling Tapping Screw 

Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood, metal etc.

This tapping screw with blunt point requires pre-hole, and typically used in plastics or thin metals. Tri-angular drive is a tamper resistant drive that requires a special driver to install. 

Specification

 
Type Tamper Proof Screw/TappingScrew
Finish Plain 
Head Type Flat / Countersunk
Drive Type Tri-angular Socket
Diameter #4 ~ #14, 2.9 ~ 6.3mm
Length 5/32" ~ 2", 4.0 ~ 50mm
Standard JIS, DIN, GB, ANSI
Stock Unavailable

Contact

If you're insterested in our stainless steel tri-angular drive tamper proof self-tapping screws, please do not hesitate to send us an email or call us at +8615867456779(Mobile) directly.

For stock, we suggest you double check from us before placing order, thank you!

Stainless Steel Triangular Drive Flat Head Tamper Proof Tapping Screws

  18-8/304/316 Stainless Steel Triangular Drive Flat Head Thread-rolling Tapping Screw 

Sheet metal screws have large threads for use in sheet metal sometimes also used in plastic, fiberglass, or wood, metal etc.

This tapping screw with blunt point requires pre-hole, and typically used in plastics or thin metals. Tri-angular drive is a tamper resistant drive that requires a special driver to install. 

Specification

 
Type Tamper Proof Screw/TappingScrew
Finish Plain 
Head Type Flat / Countersunk
Drive Type Tri-angular Socket
Diameter #4 ~ #14, 2.9 ~ 6.3mm
Length 5/32" ~ 2", 4.0 ~ 50mm
Standard JIS, DIN, GB, ANSI
Stock Unavailable

Contact

If you're insterested in our stainless steel tri-angular drive tamper proof self-tapping screws, please do not hesitate to send us an email or call us at +8615867456779(Mobile) directly.

For stock, we suggest you double check from us before placing order, thank you!

Stainless Steel Triangular Drive Flat Head Tamper Proof Tapping Screws

 

Civilian Vehicle

Civilian Vehicle,Enduro Motorcycle,Police Use Motorcycle,On Off Road Motorcycles

Jinan Maxview Industrial Co.,Ltd. , https://www.maxviewmoto.com

Posted on